回收施瓦茨贝科CMAD 1614去耦钳

回收施瓦茨贝科CMAD 1614去耦钳

东莞市诺展电子仪器有限公司

二手仪器仪表收购，回收电子测量/通信/射频仪器仪表！专业从事进口通讯类电子仪器仪表的租赁、维修、回收、销售等业务，欢迎随时垂询！

去耦钳/共模吸收钳/脉冲群电磁隔离钳Schwarzbeck/施瓦茨贝科/CMAD 1614(10 MHz -1GHz)

频率范围： 30 MHz - 200 MHz

指定于： CISPR 16-1-4

可用频率范围： 10 MHz - 1 GHz

S 11（30 MHz）： 0.6 0.75

S 11（200 MHz）： 0.4 - 0.55

S 21： <0.25

电缆直径： 26毫米

外壳材质： PVC

外壳尺寸： 66 x 70 x 414 mm

重量： 3.2公斤

CMAD 1614 - 共模吸收装置由许多精密切割的铁氧体半环状体组成，嵌入灰色塑料外壳。独特的浮动环形轴承确保铁氧体表面的**配合。长边的两个快速锁可以在几秒钟内打开和关闭夹具。

直径为26 mm的电缆束或同轴电缆被夹具接收，不会拆卸连接器或中断任何电路。短长度和大电缆孔直径的组合为CMAD 1614提供了广泛的应用。每种共模吸收装置都附有单独测量的校准证书。

CMAD 1614可用于同轴电缆和非屏蔽电缆束，以抑制不需要的共模电流（也称为编织电流）。由于这些不需要的共模电流通常是测量重复性差的原因，所以新的CISPR 16-1-4标准建议使用吸收夹。

The CMAD 1614 – Common Mode Absorption Device consists of many precision cut ferrite half-toroids, which are embedded in a grey plastic housing. 

The unique floating toroid bearing ensures a perfect fit of the ferrite surfaces. Two quick-locks at the long side allow opening and closing of the clamp within seconds. 

Cable bundles or coaxial cables with a maximum diameter of 26 mm are accepted by the clamp without disassembling connectors or interrupting any circuitry. 

The combination of short length and large cable hole diameter offer a broad variety of applications for the CMAD 1614. Each common mode absorption device comes with an individually measured calibration certificate.

The CMAD 1614 can be used for both, coaxial cables and unshielded cable bundles, in order to suppress unwanted common mode currents (also called braid currents). 

Since these unwanted common mode currents are very often a reason for poor repeatability of measurements, the new CISPR 16-1-4 standard recommends the use of absorbing clamps.

回收施瓦茨贝科CMAD 1614去耦钳

回收CMAD1614，回收CMAD1614去耦钳，回收施瓦茨贝科CMAD1614，回收施瓦茨贝科去耦钳