首页 供应 求购 城市 登陆

E4008MR 磨碎玻纤增强 阻燃LCP SUMIK

  • 发布时间:2025-01-02 11:46:22
    报价:130.0/千克
    国家地区:广东 - 东莞
    地址:长安镇长青南路万科中心41D
    公司:东莞市高合华聚合物有限公司
    电话:0769-85355419
    手机:13826977936
    微信:a13826977936
    用户等级: 普通手机验证 会员认证

    SUMIKASUPER LCP E4008-MR是高刚性,高的耐热和标准热致液晶聚酯(LCP)级,由40%玻璃纤维增强。它具有高强度、高透光率、高耐热老化性、低粘度、高成型性、低收缩率、高流动性、高耐受性和良好的回流性能。提供高速凝固,飞边产生少,各向异性高,焊接强度低,凝固速度快,阻燃性好,吸水率低,极限氧指数,热稳定性高。具有良好的耐化学性、耐热水性、加热时产生的气体量少、无翘曲、与现成粘合剂的粘合性,无需表面处理。它显示出高温和高剪切速率取决于表观熔体粘度。即使在高温下,当暴露在油中时,它也不会膨胀或变质。它采用超声波焊接,适用于无铅焊接(浸渍)。E4008适用于注塑加工。它用于继电器箱和线轴。符合 UL 94 V-0 阻燃等级。

    质量保障.原产原包

    配送到厂.持续交付

    塑料供应链.靠谱蒋志华

    我们采取可查证系统化运作模式。

    我们是热塑性工程塑料树脂的供应链服务商。

    SUMIKASUPER LCP E4008-MR  is high rigidity, ultra-high heat resistant and standard thermotropic liquid crystalline polyester (LCP) grade, reinforced with 40% glass fiber. It exhibits high strength, increased light transmittance, high heat aging resistance, low viscosity, high moldability, low shrinkage, high fluidity, high tolerance and excellent reflow performance. Offers high-speed setting with less flash production, high anisotropy, low weld strength, rapid solidification speed, excellent flame retardancy, low water absorbency, highest limiting oxygen index and high thermal stability. Provides outstanding chemical resistance, hot water resistance, low amount of gas generation on heating, no warpage, bondability with off-the-shelf adhesives and no surface treatment. It shows high temperature and high shear rate dependence on apparent melt viscosity. It does not expand or deteriorate when exposed to oils, even at high temperatures. It is welded with ultrasonic welding and applicable to lead-free soldering (dipping). SUMIKASUPER LCP E4008 is suitable for processing by injection molding. It is used in relay cases and bobbins. Complies with UL 94 V-0 flame rating.

    E4008MR 磨碎玻纤增强 阻燃LCP SUMIK

    提醒:联系时请说明是从聚荣网看到的。

免责申明:聚荣网所展示的信息由用户自行提供,其真实性、合法性、准确性由信息发布人负责。使用本网站的所有用户须接受并遵守法律法规。聚荣网不提供任何保证,并不承担任何法律责任。 聚荣网建议您交易小心谨慎。